Our milk cooling tanks are divided in three categories:

Our milk cooling tanks are divided in three categories: T family – of low capacities – 60l, 80l, 100l and 120l
S family – of medium capacities – 150l, 200l, 250l and 300l
V family – of large capacities – 500l, 800l and 1000l
Cooling units are sized for cooling milk in the conditions of two milkings. If the customers want cooling tank for one or four milkings, they are obligated to specify that. Cooling tanks are necessary for production and storage of high quality milk and its proper bacterial culture.
Construction, cooling speed, equipment and applied materials complitely satisfy the terms prescribed by the EN 13273 – 1999 standard and follows the lines of ISO 5708. The tank has evaporator with enlarged surface which allows fast cooling without apperience of ice, maximum efficiency in saving electrical energy and simple hygiene maintenance.
Producer quaranties spotless work and gives 12 months quaranty if the unit is attached to pescribed earthed installation, and is maintained according to using instructions. The tank is made of stainless steel AIS 304 with high quality CFC free polyurethane insulation 35mm thick. Inner side of the tank has high polished surface. Multifunctional digital controller is used for monitoring milk temperature, work of cooling unit and mixer. Mixer has 32 RPM, power of 16W (for T family), 30W (for S family) and 60W (for V family). Cooling tank has a programmed work in regime of turning temperature down and in regime of maintaining temperature in interval from 3,5ºC to 4,5ºC. Full ecological coolants type R314A (for T family) and type R404A (for S and V family) are used for our milk cooling tanks as are high quality compressors and condensers with air cooling. Aggregate is placed in the base of the tank (for T and S family, except S 300) or on the back of the tank (for V family and S 300).

Direct cooling – Open type

Cooling unit is sized for cooling milk in the conditions of four milkings.
Construction, cooling speed, equipment and applied materials complitely satisfy the terms prescribed by the EN 13273 – 1999 standard and follows the lines of ISO 5708.
The tank has evaporator with enlarged surface which allows fast cooling without apperience of ice, maximum efficiency in saving electrical energy and simple hygiene maintenance.
It has six to eight adjustable legs.
Outlet is butterfly valve Ø 51.
The tank is made of stainless steel AIS 304 with high quality CFC free polyurethane insulation 35mm thick. Inner side of the tank has high polished surface.
Cooling aggregate is placed on the base behind the recepting dish and it uses connection of 380V, 50Hz.
Mixer has power of 0.12kW and 32 RPM.
Multifunctional digital controller is used for monitoring milk temperature, work of cooling unit and mixer.